Friday, November 11, 2016
Fix Canon Cartridge
Fix Canon Cartridge
Cartridge
PG-40, CL-41, PG-830, CL-831, PG-810, CL-811, PG-810XL, CL-811XL, PG-88, CL-98, BCI-24 Black, BCI-24 Color, PGI-35 Black, CLI-36 Color, BCI-15 Black, BCI-15 Color, PG-50, CL-51, CL-52, PG-740, CL-741, PG-740 XL, CL-741 XL
PG-40, CL-41, PG-830, CL-831, PG-810, CL-811, PG-810XL, CL-811XL, PG-88, CL-98, BCI-24 Black, BCI-24 Color, PGI-35 Black, CLI-36 Color, BCI-15 Black, BCI-15 Color, PG-50, CL-51, CL-52, PG-740, CL-741, PG-740 XL, CL-741 XL
Model
BJ S200, BJ S300, BJ S330, PIXMA i255, PIXMA i320, PIXMA i350, PIXMA i355, PIXMA i450, PIXMA i455, PIXMA i470D, PIXMA i475D, PIXMA i70, PIXMA i80, PIXMA iP100, PIXMA iP1000, PIXMA iP1180, PIXMA iP1200, PIXMA iP1300, PIXMA iP1500, PIXMA iP1600, PIXMA iP1700, PIXMA iP1880, PIXMA iP1980, PIXMA iP2000, PIXMA iP2200, PIXMA iP2580, PIXMA iP2680, PIXMA iP2770, PIXMA iP2772, PIXMA iP6210D, PIXMA MG2170, PIXMA MG3170, PIXMA MG4170, PIXMA MP110, PIXMA MP130, PIXMA MP145, PIXMA MP150, PIXMA MP160, PIXMA MP170, PIXMA MP180, PIXMA MP198, PIXMA MP218, PIXMA MP228, PIXMA MP245, PIXMA MP258, PIXMA MP268, PIXMA MP276, PIXMA MP287, PIXMA MP450, PIXMA MP460, PIXMA MP476, PIXMA MP486, PIXMA MP496, PIXMA MP497, PIXMA MP628, PIXMA MX308, PIXMA MX318, PIXMA MX328, PIXMA MX338, PIXMA MX347, PIXMA MX357, PIXMA MX366, PIXMA MX377, PIXMA MX416, PIXMA MX426, PIXMA MX437, PIXMA MX517, Fax Machine JX-210P, Fax Machine JX-510P, PIXMA E500, PIXMA E600, imageCLASS MPC190, imageCLASS MPC200, imageCLASS MP360, imageCLASS MP370, imageCLASS MP390The types of damage and fix solutions for canon cartridges
The characteristics of damage
- When the cartridge is filled, fill up quickly.
- There was an error in charging the ink (the color cartridges)
Causes of damage
- Foam ink container, hard
- Foam ink container, polluted another color
Solution
1. Open the cartridge. Be careful, do not touch the print head and electrical contacts
 |
| do not touch the print head and electrical contact |
2. Remove the foam ink container, then wash with water
3. Replace the foam, and then inject the ink
4. Attach the cartridge cover with glue. If the glue is not strong enough, tied with tape
5. Suck the ink from the print head. Suck the ink, can be done in two ways.
- Manual: the ink vacuum
- Automatic: install cartridge into the printer, press the START - Printers and Faxes, right-click the Canon printer - Printing Preferences - Maintenance - Deep Cleaning - Execute.
6. Attaching a print head on tissue paper
Watch video below;
Complete steps how to follow instruction above
Problem 2
The characteristics of damage
- When filled with ink, print head is always flowing ink
Causes of damage
- Paper membrane cartridges, torn
Solution
Cover with paper ink retaining membrane
Problem 3
The characteristics of damage
The characteristics of damage
Red and yellow colors are not out
Causes of damage
- Print head clogged or hard foam cartridges (solution 1)
- Wet ink circuit, resulting in short-circuit on the electrical contacts (solution 2)
Solution 1
2. Clean the ink reservoir foam
3. Insert the ink into the foam
4. Suck the ink from the print head
Solution 2
Because there is damage to the red and yellow color sensor, the solution is to replace the cartridges with new ones.
Problem 4
The characteristics of damage
- Print out is not clear or striped
Causes of damage
Ink serves as a lubricant. When the ink runs out, the print head will dry. This resulted in damage to the print head
 |
| soft crack on print head |
 |
| print head is broken |
1. Torn Print head (black)
2. Torn Print head (color)
3. Normal print head, but print out striped (soft crack)
Solution
Replace the cartridges with new ones
Video How to Fix Cartridge
Cross-sectional images canon cartridges
I hope this information useful. Thanks
Available link for download
